新聞中心
標準滾動直線導軌和非標滾動直線導軌的區別
來源:http://m.feicui77.cn/ 日期:2023-07-31 發布人:
為什么一開始就要談到呢?因為標準滾動直線導軌是已經設計好的直線導軌,可以直接在滾動直線導軌生產車間進行批量生產,生產成本已經到較低水平,而非標滾動直線導軌需要重新經歷設計、測試、批量生產,這個過程通常是較長的,而且在尚未批量生產之前,費用都是較高的,導致非標滾動直線導軌的出廠都是比較高的。
Why should we talk about price from the beginning? Because standard rolling linear guides are already designed linear guides that can be mass-produced directly in the rolling linear guide production workshop, the production cost has reached a lower level, while non-standard rolling linear guides require redesign, testing, and mass production, which is usually a long process and the cost is high before mass production, The factory prices of non-standard rolling linear guides are relatively high.
標準滾動直線導軌和非標滾動直線導軌的區別
The difference between standard rolling linear guide and non-standard rolling linear guide
直線導軌規格型號尺寸表,直線導軌規格型號選型
Linear guide rail specifications, models, and dimensions table, selection of linear guide rail specifications and models
標準直線導軌尺寸參數固定,非標直線導軌尺寸參數是不確定的
Standard linear guide rail size parameters are fixed, while non-standard linear guide rail size parameters are uncertain
標準滾動直線導軌尺寸參數已經是固定,根據不同的需求,還可以跟零部件進行組合。而非標滾動直線導軌尺寸參數是不確定的,用戶可能會給出比較奇怪的尺寸參數,這些尺寸參數是標準滾動直線導軌里面尚未存在的。


The size parameters of the standard rolling linear guide rail are already fixed, and can be combined with components according to different needs. The size parameters of non-standard rolling linear guides are uncertain, and users may provide strange size parameters that do not yet exist in standard rolling linear guides.
標準直線導軌不需要重新設計,而非標直線導軌需要設計
Standard linear guides do not require redesign, while non-standard linear guides require design
因為標準滾動直線導軌的設計工作已經完成,所以不需要再單獨設計,如果有新的型號出現,才會需要在原有的設計基礎上再做改動。而非標滾動直線導軌在完成錢,則是需要重新做設計的。
Because the design work of the standard rolling linear guide rail has been completed, there is no need to design it separately. If a new model appears, it will need to be modified based on the original design. The non-standard rolling linear guide rail needs to be redesigned after completion.
非標滾動直線導軌不能只按照用戶規定的來設計
Non standard rolling linear guide rails cannot be designed solely according to user specifications
可能用戶給的非標直線導軌一些參數看起來是沒什么問題的,但不經過設計、反復測算和試驗是不能輕易下定論的,而經過一系列計算和試驗后,可能得出來的結論是這樣的參數尺寸搭配是較難完成或者在當前的條件下是根本不可能做到的,所以這就需要在技術和需求上做權衡了,可能不按照用戶規定的來設計,當然這是需要跟用戶溝通說明情況的
Some parameters of non-standard linear guides provided by users may seem to be fine, but it cannot be easily determined without design, repeated calculation, and testing. After a series of calculations and experiments, it may be concluded that such parameter size matching is difficult to achieve or impossible to achieve under current conditions, so it is necessary to balance technology and requirements, It may not be designed according to user regulations, but of course, this requires communication and explanation with the user
相關新聞 /RELATED TO RECOMMEND
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24




