新聞中心
直線導軌組件的防銹
來源:http://m.feicui77.cn/ 日期:2019-05-10 發布人:
減少生銹
Reduce rust
直接用手拿取直線導軌時,要洗去手上的汗液,并涂以優異礦物油后再進行操作,在旱季和夏日特別要留意防銹。
When you take the straight-line guide directly by hand, you should wash the sweat from your hands and apply excellent mineral oil before operating. In dry season and summer, you should pay special attention to rust prevention.
環境干凈
Clean environment
直線導軌工作環境渣滓進入導軌,也會增加導軌的磨損,振蕩和噪聲。
Slag entering the working environment of linear guide rails will also increase the wear, vibration and noise of the guide rails.
裝配仔細


Assemble carefully
直線導軌在運用裝置時要認真仔細,不允許強力沖壓,不允許用錘直接敲擊導軌,不允許經過翻滾體傳遞壓力。 直線導軌運用適宜、精確的裝置東西盡量使用專用工具。
Linear guideways should be carefully used in the operation of the device, forceful stamping is not allowed, hammer is not allowed to directly hit the guideway, and pressure is not allowed to pass through the roll body. Linear guides should be equipped with appropriate and accurate devices and special tools should be used as far as possible.
以上是大概介紹,如需使用詳細操作流程請參閱產品手冊。
The above is an overview. For detailed operation procedures, please refer to the product manual.
報錯
- 上一篇:高光機中直線導軌的傳動
- 下一篇:直線導軌滑塊有什么特點
相關新聞 /RELATED TO RECOMMEND
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23





